Irrigation Tee Valve Adapter

This Irrigation Tee Valve Adapter adopts one-piece injection molding technology, with the main pipe diameter optional at 75mm, branch outlet size 40mm, widely matched with common agricultural drainage pipelines. All raw materials are new modified HDPE plastic, without recycled filler, delivering strong anti-aging and compression resistance performance.

1. Product Performance & Real Test Data

Shuoxin® finished 500-hour outdoor UV aging tests for this series of pipe fittings; after long-term exposure under sunlight, the surface won’t crack or harden. The built-in plastic valve can adjust water flow steplessly, with maximum bearing water pressure up to 0.4MPa, fully meeting daily drainage and irrigation pressure requirements. The reserved inspection opening allows quick dredging when pipelines get clogged, no need to dig up the whole pipe section to cut construction cost.

As a factory direct supplier, we produce over 35,000 units of Irrigation Tee Valve Adapter every month to meet global bulk order demands. The thickened pipe wall reaches 3.2mm, effectively resisting soil extrusion buried underground, service life can reach more than 20 years under normal buried installation conditions.

When buried underground, we suggest covering the pipe with fine sand to avoid sharp stones scratching the pipe wall; the side valve can be twisted fully closed for pipeline maintenance without cutting off the main water supply.

2.Clear Purchasing Parameters

3. Wide Application Scenarios

This Irrigation Tee Valve Adapter fits multiple engineering scenarios: farmland drip irrigation drainage, villa courtyard landscape drainage, community municipal sewage branch pipes, greenhouse water circulation systems. Many overseas agricultural distributors keep long-term stock cooperation with us on this fitting, thanks to its dual function of inspection and flow control that reduces extra pipe parts purchase cost for end users.

Note: This inspection tee is designed for low-pressure normal temperature agricultural & municipal drainage only; it is not suitable for high-temperature industrial wastewater or high-pressure tap water pipelines.

4. Factory Supply Advantage

We own full injection molding production lines and conduct 100% water tightness inspection before shipment, defective rate strictly controlled below 1.5%. Whether you need small trial stock or full container bulk goods, we maintain stable stock of the Irrigation Tee Valve Adapter all year round, and provide professional pipeline matching suggestions based on your local project standards.

If you need to confirm available sizes, calculate bulk unit prices or apply for test samples, send over your project demand and order quantity to our sales team. Shuoxin® will sort out a complete quotation including production lead time and shipping solutions for you without delay.