Tractor Mounted Laser Levelers

The tractor mounted laser levelers achieves precise millimeter-level land leveling through the closed-loop collaboration of laser reference, real-time detection, hydraulic control and shovel operation. The laser reference plane has a wide coverage and high precision. The hydraulic response is fast, and it is combined with an adaptive shovel design, which can adapt to different soil types.

System Features

Easy installation without need for debugging, simple system composition

The tractor mounted laser levelers can easy installation and quick setup, the system requires no debugging. Once installed, it can be put into operation immediately.

Navigation line sharing

Multiple vehicles can share the navigation line, and the navigation line can be permanently saved and can be used permanently after being set up once.

Supports multiple operation modes

Supports various operation modes such as straight line, curve, plowing, pulping, and circular curve, with excellent high-speed operation performance

Information management function

Real-time viewing of vehicle location and statistics of operation area on the mobile terminal.

Remote assistance function

Quick response within 1 minute, promptly troubleshooting and solving problems for users.

Stable signal and anti-interference

Single station coverage range of large base station is 40km. No need to carry small base station. Exclusive breakpoint power-saving function, can continue to operate for 10 minutes even when the network is disconnected.

Extremely flexible

By simply adding simple components, functions such as satellite leveling, intelligent spraying, and operation supervision can be achieved. The software supports online updates, and new features are available for free and permanent use.

Target guidance by light

The screen is equipped with an error-indicating light target, making the operation accuracy clear at a glance.

Operation Instructions

1 - Install the laser level instrument onto the tractor using the tow bar.

2 - Connect the fuel pump of the laser level device to the output shaft of the tractor.

3 - Install the laser control box in the tractor cab (and connect the wires properly).

4 - Install the reflector on the scale of the laser level instrument.

5 - When entering the field, simultaneously open the side cover of the laser level instrument and the tires.

6 - Remove the tripod from the rear of the level instrument device and place it in an appropriate position on the field.

7 - Take out the launcher, screw it onto the tripod, and press the open button.

8 - As shown in the figure, the level instrument will collect ground height data in the field (here, the data comes from three different positions).

9 - The average value of the collected data will give the slope of the field.

We are well aware that different customers have diverse requirements in the land leveling operation. Whether it is the scale of the operation, the type of land, or the budget arrangement, there are significant differences. Therefore, we have meticulously developed and launched various models of tractor mounted laser levelers to fully meet your personalized choices